SISTEM KONTROL KEMUDI KAPAL BERBASIS SCADA MENGGUNAKAN APLIKASIH CX PROGRAMMER DAN EASYBUILDER

Authors

  • Bambang Laksono Aji Universitas Narotama
  • Kunto Eko Susilo Universitas Narotama

DOI:

https://doi.org/10.33020/saintekom.v11i1.176

Keywords:

PLC(Programmoble Login Controller), HMI, Steering Gear kapal.

Abstract

The development of information technology in the shipping industry has long been established. Scada-based ship rudder control system Using the cxprogrammer and easy builder applications, is a form of innovation in the shipping sector, by utilizing PLC devices. PLC will control the ship's steering gear and then connected using a network, thus forming a Scada system. The PLC will be programmed using the cxprogrammer to control the device as needed and use the easy builder as a Graphic User Interface so that the system can be used by the crew easily through graphics and animation. The purpose of this research is to make it easier for workers on the ship to monitor and control the ship's rudder drive system and operate the Steering Gear by monitoring from the platform and engine room of the ship so that their work becomes more efficient.

Downloads

Download data is not yet available.

References

Abdurrahman, Naufal, Sapto Wiratno Satoto, and Hardi Radesha. 2015. “Kajian Pemodelan Kemudi Kapal Pengawas Tanpa Awak.” Jurnal Integrasi | 136(2): 136–42.

Alinda, Desi, and Putri Siregar. 2013. “Peranan Hmi Terhadap Pendidikan Politik Mahasiswa Fisip Usu.” Dinamika Politik 2(01): 1–6.

Damayanti, Eva. 2020. “Rancang Bangun Sistem Kontrol Dan Monitoring Proses Pengisian Air Pada Toren Dengan Interface Hmi Weintek Mt6070ih Dan Smartphone Android.” 14(3): 237–48.

Dawut. 2014. “Melalui Penggunaan Media Software Cx Programmer 9.3 Untuk Meningkatkan Kompetensi Teknik Perencanaan Pengendali Plc Pada Kompetensi Dasar (Kd) Merencana Rangkaian Aplikasi Kontrol Plc Siswa Kelas Xii Tit 2 Smkn 3 Boyolangu Tulungagung Tahun Pelajaran 2013.” : 141–53.

Eliza, Fivia, Universitas Negeri Padang, Jl Prof, And Hamka Air. 2020. “Sistem Monitoring Dan Kontrol Motor Ac Berbasis Scada.” 1(1): 15–20.

Kurniawan, Billy T, Eko B Djatmiko, And Mas Murtedjo. 2013. “Perancangan Propeler Self-Propelled Barge.” Jurnal Teknik Its 2(1).

M, Diska Ayu Dhea, Arie Indartono, And Fitri Hardiyanti. 2018. “Analisa Pengambilan Keputusan Proses Pengadaan Steering Gear Dalam Proyek Pembangunan Kapal Perintis 2000 Gt.” 1509: 159–64.

Suhanto. 2010. “Rancang Bangun Simulasi Supervisory Control And Data Acquisition ( Scada ) Main Distribution Panel ( Mdp ) Berbasis Programmable Logic Controller ( Plc ).” : 47–57.

Sujito. 2011. “Implementasi Programmable Logic Controller (Plc) Pada Pengendalian Robot Pemindah Botol Minuman Sujito.” Management Operasional: 85–91.

Sutrisno, Imam, And Edy Prasetyo Hidayat. 2018. “Aplikasi Software Intellution Untuk Simulasi Scada Pada PLC OMRON.” Seminar Master PPNS 2018 1509: 35–40.

Taufiqurrohman, Muhammad. 2008. “Rancang Bangun Prototype Alat Sistem Pengontrol Kemudi Kapal Berbasis Mikrokontroler.” : 24–32.

Downloads

PlumX Metrics

Published

13-02-2021

How to Cite

Aji, Bambang Laksono, and Kunto Eko Susilo. 2021. “SISTEM KONTROL KEMUDI KAPAL BERBASIS SCADA MENGGUNAKAN APLIKASIH CX PROGRAMMER DAN EASYBUILDER”. Jurnal Saintekom : Sains, Teknologi, Komputer Dan Manajemen 11 (1):44-51. https://doi.org/10.33020/saintekom.v11i1.176.

Issue

Vol. 11 No. 1 (2021): March 2021

Section

Articles

License

Copyright :
By submitting manuscripts to Jurnal Saintekom : Sains, Teknologi, Komputer dan Manajemen, the author agrees with this policy. No specific document approval is required.

  1. The copyright in each article belongs to the author.
  2. Authors retain all their rights to the published work, not limited to the rights set forth in this page.
  3. Authors acknowledge that Saintekom Journal: Science, Technology, Computers and Management as the first to publish under the Creative Commons Attribution 4.0 International license (CC BY-SA).
  4. The author may submit the paper separately, arrange for non-exclusive distribution of the manuscript that has been published in this journal into other versions (e.g. sent to the author's institutional respository, publication into a book, etc.), by acknowledging that the manuscript has been first published Jurnal Saintekom : Sains, Teknologi, Komputer dan Manajemen;
  5. The author warrants that the article is original, written by the named author, has not been previously published, contains no unlawful statements, does not infringe the rights of others, is subject to copyright exclusively held by the author.
  6. If the article is jointly prepared by more than one author, each author submitting the manuscript warrants that he or she has been authorized by all co-authors to agree to copyright and license notices (agreements) on their behalf, and agrees to inform co-authors of the terms of this policy. Jurnal Saintekom : Sains, Teknologi, Komputer dan Manajemen will not be held liable for anything that may arise due to internal author disputes.

Lisensi :
Jurnal Saintekom : Sains, Teknologi, Komputer dan Manajemen  is published under the terms of the Creative Commons Attribution 4.0 International License (CC BY-SA). This license permits anyone to:.

  1. Share - copy and redistribute this material in any form or format;
  2. Adaptation - modify, alter, and create derivatives of this material for any purpose.
  3. Attribution - you must give appropriate credit, include a link to the license, and state that changes have been made. You may do this in any appropriate manner, but it does not imply that the licensor endorses you or your use.
  4. Similar Sharing - If you modify, alter, or create a derivative of this material, you must distribute your contribution under the same license as the original material.